FIRE/RESCUE SERVICE MODELS

PROTECT YOUR FIRE-RESCUE PERSONNEL WITH THE ULTIMATE PERSONNEL ACCOUNTABILITY SYSTEM AVAILABLE!!

In the sudden event of a flashover or collapse situation, Grace Industries' GEM System™ will immediately identify, by name, any firefighter(s) in distress!! It's the firefighters' LINK TO SAFETY!

USFA/FEMA Grant Information - Click Here

Firefighting Firefighters everywhere want the security of knowing that help will be there if they need it. Using revolutionary spread spectrum radio telemetry, combined with Grace Industries' space age solid state accelerometer, each high powered T PASS II™ transmitter will immediately relay the distress signal back to the command post indicating that an alarm condition exists. GEM System's™ LCD Command Receiver employs visual and audible warnings that a firefighter's T PASS II™ alarm has been activated.

During alarm conditions the name(s) of the firefighter(s) in distress are prominently displayed on the LCD Display Screen. The distress signal can be manually activated using the alarm button, or automatically activated if the firefighter is injured and ceases movement.

Additionally, command officers, at the push of a button, will know immediately the names of all personnel who are on the scene and whether or not their T PASS II™ device is activated.

AUTOMATICALLY AND CONTINUOUSLY PROVIDES THE FOLLOWING DATA:

 
bulletThe Identities Of Personnel Operating On The Emergency Incident Scene
bulletThe On/Off Status Of T PASS II™ Devices
bulletThe Identity Of Firefighters In ALARM
bulletWhen Firefighters Have Not Checked In

Regardless of the size of the personnel base or type of Incident Command System in your department, Grace Industries, Inc. has a GEM System™ to suit your needs.

One and two station departments, fire companies in rural locations, military and airport installations can select the GEM System's™ 2, 4, 8, 12, or 16 channel configurations, based on personnel and response system requirements.

The ability to respond rapidly to a firefighter's call for help, whether activated manually or automatically, can mean the difference between life and death. Firefighters and rescue workers risk injury or death on every incident. With Grace Industries' GEM System™, the progressive fire department can offer its personnel the utmost protection via a fully automated Personnel Accountability System.

REMEMBER: Whether A Large Or Small Department, GEMS is your LINK TO SAFETY!!

PRODUCT SPECIFICATIONS

T PASS II™ ALARM TRANSMITTERS
RADIO Ultra Efficient Spread Spectrum 902-928 MHz band. No FCC license required.
AUDIO OUTPUT 95+ dBA with attention getting sound signature in mode.
DIMENSIONS Only 2" wide x 3-1/4" high x 1-1/8" deep. Weight is 8 oz. with battery.
VISUAL The entire case glows and changes color to indicate the mode of operation. (An invaluable aid in locating a downed firefighter!).
MOTION DETECTOR Solid state accelerometer.
POWER 9 volt alkaline (Duracell MN 1604 recommended). Average battery life - 3 months.
CASE High strength polycarbonate case.
GEM SYSTEM™ BASE RECEIVER
RANGE Up to 1 mile depending on limiting factors and environmental conditions.
ALARM CONDITION DISPLAY All models offer a vocal message and alarm warning lights. Personnel information is displayed on a Liquid Crystal Display screen (Command Receiver), or by specific channel indicators (T-2 thru T-16).
INTERNAL POWER 12 volt internal power supply provides 8 hours of continuous operation.
EXTERNAL POWER OPTIONS 120 - 240 volts AC, with auto charge feature. Also comes with 12 volt DC cigarette lighter type power plug.
CASE Rugged, impact resistant ABS carrying case in Safety Yellow. Unit is totally portable.
The GEM System's T PASS II™ Transmitters are Intrinsically Safe and are certified to meet or exceed the requirements of NFPA 1982 ('98 Edition)